When it comes down to the kitchen faucet, purchasing the ideal one relies majorly on the already existing plumbing in your kitchen. The fact remains that, purchasing a new kitchen sink faucet can be both frustrating and overwhelming, all at the same time. However, in this article, we will be looking at some buying guides or considerations when getting a new kitchen faucet.
Considerations For Kitchen Faucets:
In buying new kitchen faucets, so things you should consider include:
Begin with the sink:
There is diverse kitchen faucet sand even sink designs that are made available in the market place. However, they are not compatible most times. You can begin your search by taking a glance at your own kitchen faucets
This is done in a bid to have an idea of the amount of faucet mounting holes that are available. Also, this is also applicable if you are going to install a new faucet in a sink that already exists.
Nevertheless, should your kitchen faucet have a mounting plate that is already on it, you can check below the sink to have an idea of the number of holes. You will be checking on how many holes the kitchen faucet has.
Furthermore, every faucet is also displayed on the packaging and the number of mounting holes you will make it in installation. Bear in mind that, kitchen faucets are made available in about four hole versions.
Nonetheless, there are kitchen faucets that give you diverse alternatives in accommodating diverse configuration for your sink.
Note that, if your faucet will only be making use of two holes but your sink actually has three, you will be left on figuring out how to go about the third opening. Also, the sink mounting holes location is one thing to bear in mind.
Frequently, the kitchen faucet is situated very close to the middle of the sink, though, the case is not always the same. If the faucet can be mounted on a specific side of the sink, your spout will have to be long enough to get to the opposite basin.
Here, a tall spout that makes use of a pull-down spray nozzle is yet another alternative for the sink that has corner mounting holes.
Double-check the water lines:
Ensuring that the new kitchen faucet is highly compatible without the water supply line is the next step to take. Before you begin shopping, you are to take a quick look beneath the sink and make a mental note of the already existing sink of the waterline.
You are to make a mental note of the shut-off valves as well. And, as you pick new kitchen faucets, you should check if it is one that comes bearing 3/8 inches flex lines. This is how most faucets are.
Also, if the already existing water shut-off valves are about 1/2 inches, you will have to change the shut-off valves to the 3/8 valves. This is to be done before you will be able to install your newest kitchen faucets.
It is basically a great idea to displace and possibly replace the shut-off valves when embarking on installing a new kitchen faucet. This is because an old valve is much more likely to fail you should you want to shut off the water at a point in time.
Nevertheless, you should ensure that you are aware of the water pipe size as well as the size demands for your latest kitchen faucet.
Make sure you know the finish:
While this is majorly for aesthetics purposes, it is a vital consideration when displacing and replacing any of the plumbing fixtures. Ensure that you make a side note of all the finish you currently have or thought about buying.
Your kitchen faucet should be able to match the finish of your sink accessories like the soap dispenser, air gap, and even the sink-hole whenever it is possible. Also, a shiny chrome finish is going to look odd.
This can happen if the other areas of the fixtures are just full, brushed nickel finish.
Is It A New Faucet, A New Sink Or Even A New Kitchen?
One thing you will have to figure out is the mounting type you are interested in. The choices vary between:
- A sink deck
- A wall, or;
All of this solely depends on if the sink will be new. Note that, a new sink basically gives you much more liberty to select where your kitchen faucet goes.
However, if you are only going to replace your faucet, you may actually have to follow the existing installations. Like we mentioned earlier, you are to have an idea of the number of holes that are available on your countertop or sink deck.
Or, if it is possible to actually drill some more if your dream faucet requires it. The majority of our single handle kitchen faucets will demand just one hole. And, the two handle faucets will demand about two to three.
Extra holes may actually be required for things such as filter faucets and air gaps, just like we mentioned earlier. Furthermore, if the faucet will be for a new sink, you can hold off on your sink till you get the faucet you need.
With the majority of the sinks available, you can be specific on the location of holes as well as the numbers you want on the sink deck. This gives you the leverage to pick on any faucet you see.
Also, the kitchen faucets that are installed in the new countertop may also be decided upon before you finalize the countertop installation. This is done to ensure the holes are properly drilled wherever they are needed.
As for the sink that is already in existence, you can actually find a new faucet for your old sink. It aids in bringing compatibility to the fore. If the kitchen faucets that you want to demand fewer holes than the sink you have, it is simpler to deal with.
This is because, there are deck plates, faucet hole covers and even escutcheons to cover up the hole. Some of these kitchen faucets can also be ordered with the extended deck plates.
You can make use of it to cover up the existing home on both sides of the kitchen sink faucets. Also, if just one hole is remaining exposed, you can think about adding probably a soap dispenser or a water filter.
Moreover, you should ensure you are cautious when selecting the plates that will be used in covering holes.
When it comes down to some installations, a huge cover can actually bump against the wall. This will create a small space that will begin collecting grime as well as what. And, from experience, such small spaces are almost difficult to effectively clean up.
If you are interested in modifying your kitchen sink faucet to a wall-mounted one, you are to ensure that the sink’s location and even the studs on the wall can effectively line up.
This lining up is with the sink’s centerline and the handle will turn fully. In some other cases, the studs may never be relocated. Should the wall behind your sink be an outside wall, you can take a different route.
Types 0f Kitchen Sink Faucet:
In considering all you need when purchasing the kitchen faucets, you should take a quick glance at the types of faucets available. They include:
When a particular faucet is not doing the trick, it may as well be time to add yet another. The bar or even the prep faucet is smaller for the small sinks. These ones are usually installed in bar counters or those kitchen islands.
If you have made use of them before, you may as well have an understanding of their value. You can space out your kitchen, dole up your work and at least, save lots of time. Also, select just the prep faucet that is to compliment the major faucet.
Pot filler faucets:
With such a faucet, you will need to have a water supply that is on the wall. It is imperative that you take a cautious measurement from the mounting area down to ensure your faucet reaches wherever you need.
Note that, the best pot filler faucet has articulated spouts for complete flexibility. If you need just something very simple, you would have made use of Wok faucet. They are simply a straight spout that is coming out from your wall.
Major Things To Consider:
So many people have asked for the major things to consider when purchasing kitchen faucets. Well, some of the most vital things you should bear in mind include:
Immediately you are done contemplating the installation and mount type that you prefer, you can easily make a move to the size and reach of the kitchen faucets. While it will mostly be dictated by the sink’s size, there are vital design choices to make
Also, the height of the faucet is basically the dimension that most of us are concerned about. This is because it aids in determining the cookware size that can be simply maneuvered and possibly washed in the sink basin.
You are to ensure that you check up on the complete dimensions of all faucet you prefer in a bid to make sure the height you saw is the exact same height you are concerned with.
Furthermore, the arc of any faucet simply refers to the curve and height of the faucet’s spout. Those high arc faucets are majorly eight or more inches tall. They are good for the common hand washing of big pots and pans.
For those who have low cabinets or shelving, ensure that you measure the space made available in a bid to find a kitchen faucet that readily fit. Bear in mind that, the low arc kitchen faucets are not higher than eight inches from the deck.
It is ideal for small spaces and sinks. They are the best for the group of people that do not frequently wash big items.
Asides from the interesting stuff such as features, design and even finish, there is the construction of the faucet. This centers on the materials used in making up the faucet as well as the mechanisms through which it functions.
It is at this point that the great faucets are separated from those that are considered to be merely good. What you will have to do is to search for a sturdy brass or a stainless steel faucet that has ceramic discs. You can go wrong with such.
Note that, the most popular material used in making kitchen faucets are:
- Zinc alloys
- Brass, and;
- Stainless steel
Note that, the plastic faucets are less costlier than the metal models. But, it is barely durable. Though the metal alloy faucets are considered serviceable, it is a short-lived alternative for people who are on a tight budget.
In an effort to displace lead, some of these manufacturers now make use of PEX inside their own faucets.
The cartridge type:
Yet another vital area of the kitchen faucets is the type of cartridge that it makes use of. The older faucets depend on either ball valves or compression in a bid to control how water flows.
However, manufacturers have shifted from them too much more reliable cartridge system. The compression kitchen sink faucet makes use of rubber washers that tend to degrade quite quickly.
Note that, the ball-type faucets are majorly composed of diverse parts and each of them is prospective fail points. This is as a result of their leaking reputation. The basic kitchen sink faucets cartridge is made up of brass and plastic.
The latest cartridges are the ceramic discs cartridges. They are ideal for controlling the flow of the faucet. It comprises of two ceramic discs. While one is fixed, the other tends to rotate.
Like we mentioned at the beginning, purchasing new kitchen faucets is not just exciting alone, but it can get very frustrating. When you finally get to purchase one, you are to pay very close attention to all the manufacturer’s care suggestions. If you make use of the wrong chemicals, it will lead to one of the major causes of finish degradation. Also, stay away from those premade store-bought cleaners and make use of a soft cloth, paper towel or sponge for cleaning.