Cabinets occupy the most prominent place in any kitchen. If your kitchen furniture has lost its beauty, give it a refined look with a refresh of colour. However describes below, how many coats of paint on cabinets?
Of course, you can replace the cabinets, but this is an expensive undertaking. Repainting is a budget choice for design changes that can transform your kitchen.
Freshly painted cabinets with paint can transform your kitchen and will cost much less than replacing an old one. Before you decide to start, in any case, check the condition of your cabinets.
If they are made of chipboard, which is deformed and rotted, even a good painting will not be able to hide the flaws. Rugged wooden cabinets, on the other hand, can be greatly improved with a fresh coat of paint.
How Many Coats of Paint on Cabinets?
This is the main question people are wondering about. The least number of coats you can use on your cabinets is two. But after painting one, ensure that you wait for some time before applying the second one.
This will give the first time to dry. The number of coats of paints for cabinets depends on the quality of the furniture.
Steps of applying coats of paint on cabinets
Painting kitchen furniture takes several days. Make sure that you can allocate the time that is needed for this project. Next, you need to decide on the choice of primer and paints to use.
Cabinets are subject to intense wear and tear, so it is better to refuse to buy cheap paint, which will peel off and crack in the future. It will not be difficult for you to repaint the kitchen cabinets if you stock up on time and with patience.
Choosing a Colour
Make sure you match the colour of the furniture with design elements that are already in the room. The chosen colour should go well with your technique and the whole of the interior. Use colours that are bright to paint your kitchen cabinets.
Removing and Marking Doors
Remove cabinet doors and also the drawers, making sure that they are present and correctly labelled. A masking tape marked on various places will save you from many hassles in the future.
Having decided to replace worn-out equipment with new components, you must drill holes for them, and fix existing ones with sealant and wood glue. Keep the hinges inside the cabinet.
The kitchen is a utilitarian space in which incomparably dirt and even grease accumulate than in other rooms. They will interfere with the adhesion of the paint to the surface, so it is essential to make sure that all cabinets and drawers are properly prepared.
Use protective gloves and glasses during the process. After cleaning, wipe the furniture well and let it dry completely.
Thorough cleaning and degreasing of surfaces is an essential step in updating cabinets.
Finishing the surfaces requires grinding. Otherwise, the paint will again not hold well. If the cabinets have already been painted before, but do not have any chips or peeling, just lightly sand them until they are dull.
But if there are places where the paint has moved off, it is necessary to clean the surface to the state of untreated wood. For better adhesion to the paint, the surfaces should be sanded to a dull condition.
The selected primer must be of high quality and suitable. If you are going to work with a dark or previously painted surface, the primer will help to hide the previous colour so that it does not appear through a layer of new paint.
Stick masking tape on areas that do not need painting and cover surrounding objects with a cloth. Use a roller or brush to apply a primer. Rollers are better suited for flat surfaces and allow you to cover a large area.
If the cabinets are decorated with carvings or other details, it is better to use a brush to process all the nooks and crannies. Protect adjacent surfaces with masking tape and cover surrounding objects with a cloth
For painting, you can also use a roller, brush or both of these tools alternately. Apply a thin coat of paint and let it dry completely. After that, lightly sand the cabinets and repaint the surface. The number of layers depends on the quality of your furniture. All work may take several days.
Each new coat of paint can only be applied after the previous one has completely dried.
How To Paint
-Separate with tape all the areas that you will not paint. Glue around the inside edge of drawers or cabinets if you do not want the paint to leak inside. Be sure to glue along the edge of the ceiling or walls at the junction with the cabinets.
-Paint the internal parts. Use a short brush for all small sections of the cabinet drawers, and continue to paint inside the cabinets with a small roller or brush.
-Then paint the cabinet doors. Roll out the paint on the doors with a large roller, painting large areas at a time. Paint the edges of doors, drawers, cabinets with a small brush. Do not forget to also paint the reverse sides of doors and drawers.
Apply a thin layer of paint to leave fewer visible strokes. If you have previously applied a primer, thin strokes should qualitatively cover the surface of the cabinet. Remember that you can apply a second coat of paint.
You can take the cabinet doors out and use a paint sprayer to paint them. Allow one side to dry, flip and apply on the other side.
-Let the paint dry completely on all doors, cabinets and drawers. If there is another layer of paint, you must give at least 4 hours to the first layer of paint to dry.
-Then apply a second coat. You will not need more than two coats of paint, especially if you have used a primer, but the difference between one and two coats can be amazing: It may look like the difference between decent work and professional work. Give the paint all day to dry.
After the frames of the cabinets, doors and drawers are completely dry, you can assemble them. Install fittings. With the marking, it will be easy for you to put all the parts in the right places.
To sum up, it is important to use at least more than one coat of paint on your cabinets. This will make them have a nice finish. After going through the article, you will know how many coats of paints on cabinets you should use. Start your journey of refurbishing your cabinets!
I’m Lucas P King who has a passion, product reviewers, and blogger. However, My Home Gears Blog is created with the objective of sharing comprehensive and in-detailed information to the people on how to get their day to day work done at home through gear available in the market. We do proper research on the products before sharing more details with you on how to use them. Hence, you will be able to go through the recommendations that we share through our blog and make an informed decision to make your life easy in getting things done at home through the assistance of home gear and other equipment available.