How Does a Garden Hose Pressure Washer Work?

Garden hose pressure washer can even remove the molds around the walls of the house. How do you increase the pressure of water in the garden hose for a pressure washer? This is easy! Just connect the garden hose to a high-pressure nozzle even though the pressure will be a bit lower than that of the pressure washer.

If you are planning on buying a pressure washer, you will need to have a garden hose. It is essential when it comes to connecting it to the outside tap and to the pressure washer itself. When buying pressure washers, they are all good to go but require just some few connections, and they are good to go. Therefore, if you do not have a garden hose, you will need to get one for yourself.

What are The Things To Consider When Buying a Garden Hose Pressure Washer

A garden hose is an important tool around the house. You need to consider a few things before purchasing it, bearing in mind that using it for the pressure washer will not be the only thing you will need it to do. For example, you might need a garden hose to water your plants regularly.

You may also need it to clean your car or the walls of the house. Below are the things you should check before buying a garden hose for a pressure washer.

Length

If you need the garden hose to be doing other works around the house, then you will need a long hose. If you need it to water plants, buy a long garden hose. The one for the pressure washer should also belong to cater to your needs. You should try estimating to what length you would want your pressure washer to go, maybe because you need to clean the walls.

Material

The materials used to make the hose will also be of importance. Be careful so as not to buy that material that easily cracks or gets holes. Also, be sure not to buy a plastic garden hose.

Go for a rubber garden hose one that you can easily fold without having to worry that it is going to crack or break. Ensure that the garden hose is flexible in a way that it can extend and go round sharp corners without affecting the water pressure.

When it comes to buying a pressure washer, also think of how you are going to use it. What other reasons apart from why you are buying it will you use the pressure washer? There are so many reasons that one may want to buy a pressure washer, like watering your garden, cleaning your car, removing molds from the walls, among others.

Be sure that the specification to which you are buying the pressure washer is good enough to sort out your needs. Also, look out for where you can get these pressure washers at a lower price, one that you will afford. There are those people that love making a lot of home improvements from time to time. Maybe for painting jobs.

They will need very high-pressure washers, maybe those that reach 3,300psi. They might be hard to manage for others, but it will be easier for other people. Therefore get just what will fill in your needs.

A pressure washer pump can pump over 500pounds of water pressure. Meaning, if you attach your garden hose to the pressure washer, you will have water pressure just like that of the firefighters. The firefighters use a pressure nozzle that is or above 250psi. You will even need to put on something to protect your eyes from the pressure.

You might be wondering how you will connect the garden hose to the pressure washer. This is very simple. Below are the steps you will need to follow to join the garden hose pressure washer.

Step 1

Check the type of faucet that the garden hose has. Ensure that the screws will fit in well and that the rubber washer is not at all cracked. A cracked rubber washer will not give you the required results as it will lead to leakage, thereby reducing the water pressure.

You can always use a screwdriver to remove a cracked rubber washer. Note, the screwdriver should be the flat-head screwdriver. Push the new rubber washer into the garden hose. Use your thumb or finger to ensure that it fits incorrectly.

Step 2

Check the whole hose for any holes or cracks that may go unnoticed. These areas can reduce pressure or leak. Surprisingly, they can even burst open when the pressure is too much. It is wise to use a new hose if you find any cracks or holes rather than trying to fix them.

Ensure that the hose you are planning to use is just the right length for where you want it to reach. The shorter the distance traveled, the higher the pressure. If the hose is too long and it will have to curl around, the water might not be having a lot of pressure due to the long distance.

Step 3

Using one end of the hose, screw it to a faucet. A recommendable faucet would be 250psi. Attach this onto the other end of the hose. The fireman nozzle is easily found at the hardware shops hence no need to worry. The prices are also friendly, meaning you will not have to struggle in any way financially to acquire it.

However, you might find that even after doing all of this, the pressure coming out of the garden hose is not enough. How then will you increase its pressure? If you are sure that the hose does not have any leakages, and you have already bought a new hose, but nothing changes. Then try out these steps, and they will probably work for you.

Step 4

Ensure that you countercheck the connection between the water hose and the faucet. The screwing should be tight and straight. If this is not tight, there might be a spray of water from the faucet connection, thereby reducing the pressure. Also, due to the extended use of the faucet, it can wear out and expand in a way that it will be hard for you to screw it to the hose pipe. It will leave some spaces. Therefore, double-check the faucet, if need be, buy a new one.

Step 5

Another problem causing this is if you have a short or too long hose, there will be an interruption in the water pressure. Also, check on the diameter of the hose. A half-inch hose diameter is capable of producing at least 9 or 10 gallons of pressured water per minute.

A three quarter inch diameter hose will give you 23gallons of pressured water per minute. Check on these and get a hose with a bigger diameter. The garden hose should also not have any twisting or kinked sections. These will restrict and hinder water flow through the hose.

The pressure of water will reduce as it struggles to bypass the twist. Also note that if a hose stays for long in the twisted state, it might break or crack. Ensure that any twist on the hose is quickly taken care of to protect against breakages.

Step 6

When it comes to adding a pressure washer to your hose pipe, you can do this if you are not using it to clean brick, concrete on the sidewalls of your house. The pressure will even be more significant, and you, therefore, need to be careful.

Using pressure water for the wrong purpose will result in damage in your home or any other property you may be cleaning since the pressure tends to be so high. For example, when washing a car using a pressure washer, it can be damaged in some parts. This is especially in the sensitive areas of the vehicle.

Do not use the pressure washer too close to the car as it may get its way through the weak points, thereby damaging the painting or a lot of moisture getting into the metalwork. You would not want this to happen to your car. If you use your vehicle for long such that it will require regular cleaning and servicing, it is good that you use an appropriate pressure washer one that will not release too much pressure interfering with the vehicle.

You will have to choose whether to use a garden hose or a pressure washer for your car. For the pressure washer, it is possible for you just to remove the nozzle, which will reduce the pressure. As for the garden pipe, you can easily detach it and put it back on when it comes to rinsing. Either way, you will get the best results without any damages.

A Garden Hose Pressure Washer is an essential tool around the house. You will need it to help you do some cleaning. Take into consideration some things before buying the pressure washer. With the right garden hose for a pressure washer, you will get excellent service.

Leave a Comment